PRODUCTS CENTER

Papua New Guinea X.B Series Cycloid Reducer

Model number：X1—X117 B0—B85

Category:

Papua New GuineaX,B Series Cycloid Gear Reducer

Product Description

Performance Characteristics

•　Large transmission ratio: the transmission ratio of one-stage deceleration is 1/9-1/87; the transmission ratio of two-stage deceleration is 1/99-1/7569; the transmission ratio of three-stage deceleration is 1/2057-1/537399 According to the needs, more stages can be used.

•　High transmission efficiency: Since the machine adopts rolling meshing in the meshing part, the average efficiency can reach more than 90%.

•　Small size and light weight: Because of the planetary transmission principle, the input shaft and output shaft are on the same axis, and there is a unique direct connection with the motor as a whole, so the machine has a compact structure, small size and light weight.

•　Fault less, long life: the main drive meshing parts of this machine are made of bearing steel, so it has good mechanical properties, good wear-resisting properties, plus the use of rolling friction, fault less, long life.

•　Reliable and smooth operation: the machine is multi-tooth meshing in the transmission process, so it makes smooth and reliable operation and low noise.

•　Convenient disassembly and easy maintenance: due to the reasonable structural design, it is easy to disassemble and easy to maintain.

•　The machine also has strong overload capacity, impact resistance, small moment of inertia, and is suitable for frequent starting and forward and reverse rotation.