Why use a reduction motor? Tell you 5 benefits


Date:

2023-07-10

With the further development of China's mechanical industry, more and more users are using gearmotors, although the widespread application of gearmotors in many mechanical equipment has been widely recognized.

With the further development of China's mechanical industry, more and more users are using gearmotors, although the widespread application of gearmotors in many mechanical equipment has been widely recognized. However, there are still many users who have not been exposed to the concept of gearmotors and believe that a simple transmission structure can achieve the functions of gearmotors, but this is not entirely the case. Below, the editor will list the top 5 benefits of using a speed reducer and tell you why you should use a speed reducer
1. The addition of a reduction motor can reduce the Moment of inertia, generally the square of the speed ratio, and can control the start stop and speed change in a timely manner.
2. By increasing the torque through the reduction motor, it is equivalent to increasing the input power, which can reduce the power required for the input motor (in situations where speed regulation is required). Generally, the motor is expensive, so a reduction motor is considered.
3. The reduction motor has a protective effect on the motor during transmission. During operation, the reduction motor bears a large torque. When overloaded, only the overload divided by the reduction ratio is transmitted to the motor. If directly borne by the motor, it may cause damage to the motor.
4. When the overload of the reducer motor is very high, the reducer may be damaged first, and the reducer can be restored to use only by replacing spare parts, which is relatively low in cost. If the motor is directly damaged, maintenance is relatively slow and expensive.
5. When the deceleration motor is directly connected to the load for low-speed operation, the motor will inevitably increase significantly in order to meet the output torque current, which will have higher requirements for heat dissipation and insulation of the motor. From the perspective of energy conservation, it is also not advisable. If a deceleration motor is used, the impact of these problems can be reduced.

Keywords:

high speed,effect,container

Inquiry