Cylindrical Gear Reducer Diagram


Date:

2023-08-09

Cylindrical Gearmotor to do the drawing process

      Cylindrical Gearmotor to do the drawing process:
  1, the first to master each of the main parameters of the gear reducer; 2, after mastering the gear reducer can just start drawing, first drawing the active shaft and the driven shaft.
  2, after mastering can just start drawing, first draw the reducer's active shaft and driven shaft; 3, draw the reducer drive gear and oil ring; 3, draw the reducer drive gear and oil ring
  3, draw the gear reducer drive gear and oil ring; 4, draw the gear reducer in the gear reducer.
  4, drawing gear reducer rolling bearings, must pay attention to the orientation of the shaft and accurate positioning.
  5、Drawing the bearing end cover of the gearhead.
  6、Drawing the filling material and cover in the reducer.
  7、Drawing reducer case; 8.
  8、Drawing the box subjective map; 9.
  9、Drawing the side view of the box body.
  10、Drawing the cover.
  11、Drawing the main and side view of the reducer bushing and driven shaft.
  12、Drawing the coupling ground bolts on the reducer.
  13, drawing reducer internal subtle but important permeability plugs, gaskets, oil level gauge, screw plugs and washers.
  14、Engineering drawings need to indicate each specification.
  15, labeled with the number of parts, fill out the statistical tables, menu bar and technical standards.
  16, the engineering drawings and then check the depth of tracing.

Keywords:

high speed,effect,container

Inquiry